The software allows you to create what they call a Window To Go USB drive. In just three steps, you may clone your Windows operating system and send it to a USB drive with the WinToUSB software. You should be able to see how Windows starts correctly, and once configured it will be saved there, so that you can choose any other device and it will also work, keeping the files you store at all times.Clone your Windows operating system to a USB drive To do this, you will have to turn off your computer or use another, and modify the boot order or the corresponding configuration (generally it can be achieved from the BIOS, see how it is done according to the manufacturer of your computer or its motherboard) so that start from said pendrive. Once everything is configured, when the wizard has finished you can boot from your USB drive to start Windows. This process will take more or less depending on the reading speeds of the selected media, and the writing speed of your USB device, but it should not take too long, although it may take time to start. Once everything is chosen, the program will start to check that everything is correct and copy the necessary files to the USB drive, to later carry out the installation of the version of Windows you have selected. How to burn an ISO image to a disc (CD / DVD) without installing anything in Windows 10 Keep in mind that at this time the disk will need to be formatted, so you will lose all the data on it. Doing this will bring up a new window for you to specify the type of boot partition you want to create based on your computer (You can check this information in the boot configuration of your computer, or simply try to see which one is appropriate), and then you must select the final capacity of the hard disk on which Windows will be installed to begin the installation. Once this is done, you should choose the external drive where you want to install Windows, that is to say, the pendrive or hard disk connected by means of USB. In the same way, you will also have to choose the system you would like to install and its architecture (32 or 64 bit) in the list shown. This can be changed by means of the icons that you will find on the right, although regardless of this you must select either the location of the file or the drive where the installation program is located. On the home screen, you should choose if you want to install from an ISO file, or from an inserted disk. Once you meet the requirements, insert the pendrive and Windows installation media if you have them on your computer, then open WinToUSB to begin. There is a free version that will allow you to do everything you need in the beginning, and that you can get directly from the official website.Äownload any ISO of Windows 10 Insider versions like this Install Windows on a USB stick WinToUSB installed on your computer: you must download and install the latest version of the WinToUSB program on your computer so that the Windows installation can be carried out.It is valid both an ISO file, which you can easily obtain from the Microsoft website of the latest versions, and Windows 10, Windows 8 o Windows 7, like any CD you have that allows installation. Windows installation media: You will also need the installation program for the version of Windows you want to install.In online stores like Amazon you can find very economical and totally valid options. It is important that it has enough capacity so that you can install everything you need, and, especially if you are going to install Windows 8 or a later version, it is highly recommended that you use USB 3.0 or type C if your computer allows it to achieve current speeds. Pendrive or external hard drive: First, you will need the external storage to use to install Windows.In order to start the installation of your Windows, you will need some previous requirements: How to mount an ISO image in Windows 10 Necessary requirements
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |